Single Spring Hinge Installation Method Spring Hinge Installation Precautions
Although hinges are small and inconspicuous, spring hinges are crucial in daily life. In addition to careful selection, we also need to install them properly when using them. So, what are the installation methods for single spring hinges? What are the precautions for installing spring hinges? Don't worry, let's take a look at Jiuzheng Hardware Network below.
Spring hinge
Installation method for single spring hinge:
A spring hinge is a hinge that can automatically close after the door leaf is opened, equipped with springs and adjustment screws, and can adjust the height and thickness of the board up and down, left and right. Single spring hinges can only be opened in one direction, while double spring hinges can be opened in both directions inside and outside, mainly used on the doors of public buildings. The double spring hinge can be opened in both directions inside and outside, with a compact structure and a built-in spiral spring. It is equipped with a hexagonal wrench to freely adjust the spring pressure. It is advanced in design, operates without noise, and is durable. It is equipped with stainless steel hinges, strong elastic iron springs, and high-quality resistance oil, ensuring smooth, smooth, and noise free operation. The surface treatment is meticulous, uniform, and has clear edges and corners; The thickness, size, and material of the hinge are accurate.
Before installation, it is necessary to check whether the hinges match the door and window frames and leaves, whether the hinge slots match the height, width, and thickness of the hinges, and whether the screws and fasteners connected to the hinges match. The connection method of spring hinges should match the material of the frame and leaf. For example, for steel framed wooden doors, the hinge connected to the steel frame is welded on one side, and the side connected to the wooden door leaf is fixed with wooden screws. In the case of asymmetric two leaf plates in the spring hinge structure, it is necessary to distinguish which leaf plate should be connected to the leaf, which leaf plate should be connected to the door and window frame, and the side connected to the shaft three sections should be fixed to the frame, The side connected to the two sections of the shaft should be fixed to the door and window. During installation, it should be ensured that the shaft of the hinge on the same leaf is on the same vertical line to prevent the door and window leaves from bouncing. Before installing the spring hinge, it is necessary to determine whether the door type is a flat or grooved door, as well as the material, shape, and installation direction of the door frame.
1. Insert a 4mm hex key into one end hole, press it all the way down with force, and at the same time, open the hinge.
2. Install the hinges with screws into the hollowed out grooves on the door leaf and frame.
3. Close the door leaf and keep the spring hinge in a closed state. Insert the hexagonal key again without pressing it down. Turn it clockwise and hear the sound of gear meshing four times. Do not exceed four times! If it exceeds four times, as the spring has twisted to its limit, opening the door leaf will damage the spring and lose its elasticity.
4. After tightening the hinge, the opening angle should not exceed 180 degrees.
5. If you want to loosen the hinge, just synchronize with step 1.
Spring hinge
Precautions for installing spring hinges:
Check the matching degree
When installing the spring hinge, it is necessary to first check the matching degree to see if the hinge itself matches the door and window frames and leaves. Generally speaking, if there is a mismatch, it cannot be installed and the effectiveness of use will also be affected. For users, it is necessary to first conduct a basic inspection to see if there are any problems, and pay attention to selecting the appropriate hinge to improve efficiency.
Check specifications
Consider installing the spring hinge color, and also confirm whether the height, width, and thickness of the installed hinge meet the installation requirements. Pay attention to selecting the appropriate spring hinge to ensure that the screws and fasteners connected to it can also be matched and used for a longer service life. Of course, determining in advance can also avoid the inconvenience of later replacement.
Ensure proper fixation
Installing spring hinges for fixation is inevitable. Connect the hinges of the spring hinges to the corresponding frame, fan material, etc., and fix them according to the installation situation. During the installation process, attention should be paid not to be too loose, so as not to cause instability and detachment, which may affect the use of the entire furniture.
Maintain uniformity
In the installation of spring hinges, it is important to note that the entire fan hinge should be kept on the same vertical line to ensure more stable use. If there are any problems, they can be promptly resolved to ensure a more stable user experience, support longer use, and reduce the occurrence of many faults.
Conduct a thorough inspection
After the installation of the spring hinge, it is also necessary to conduct an overall installation inspection to see if there are any problems. It is necessary to conduct corresponding inspections to see if it is safe and secure, and if there is good operational guarantee. Any problems should be promptly discovered and dealt with to avoid any impact during use.
